Tark Audio
SQUIDINK - Analog Octave Crusher
Maker: Tark Audio
Current Production (12-2024): Yes
Retail: $219
References
Marketing:
SQUIDINK is a blend of a Fuzz and an analog Multi-Octave Generator. The Fuzz circuit employs a classic “Fuzz Face” topology using modern, low-gain Silicon PNP transistors. The FUZZ knob adjusts the gain of the fuzz circuit. The MIX knob controls the ratio of fuzz and octave signals. The VOLUME knob controls the output volume of the effect.
The analog Multi-Octave Generator uses a Phase-Locked Loop (PLL) circuit to output signals that are -2, -1, +1, and +2 octaves away from the input signal. The low and high octave selection switches select between the -2/-1, and +1/+2 octave sources, respectively. The OCT MIX knob controls the mix ratio between the high and low octave sources. The mixed octave signal is fed through a Voltage Controlled Amplifier (VCA) that is modulated by the envelope of the input signal. This amplitude shaping helps to add articulation to the octave signal.
The analog Multi-Octave circuit has multiple tracking options. In NORMAL mode, the TRACK knob and SLOW/FAST switch control the speed and character of the octave tracking. In WIGGLE mode, the octave signal portamentos to the target output frequency. The portamento time is controlled by the TRACK knob and SLOW/FAST switch. The octave signal can be enabled and disabled with the OCT footswitch. When the octave circuity is disabled, the MIX knob has no effect on the fuzz signal.
SQUIDINK has a high-impedance input buffer and a low-impedance output. It implements relay controlled True-Bypass. It can be powered by a +9V to +18V, DC, center-negative voltage source and it consumes a maximum power supply current of 40mA.
SPECS
Operating Voltage: +9VDC to +18VDC
Current Draw: 40mA (max)
Input Impedance: 1 MOhm
Output Impedance: 5.1 kOhm (max)
Bypass: Relay True-Bypass
Dimensions: 3.7" x 4.7" x 2"
Weight: 343 grams
Jack Position: Top
